Sony CMT-HX80R Manual Do Utilizador

CMT-HX80R.GB.3-452-364-11(1)

If the system still does not operate 

properly, reset the system to factory 

settings.

Use buttons on the unit to reset the 

system to its factory default settings.

Disconnect and reconnect the power 

cord, and then turn on the system.

Press /CANCEL 



, DSGX 



 and 

/ 



 at the same time.

All user-configured settings, such as 

preset radio stations, timer, and the 

clock, are deleted.

Complete!: The preset operation ended 

normally.

LOCKED: The disc tray does not open. 

Contact your nearest Sony dealer.

No Disc: There is no disc in the system, 

or you have loaded a disc that cannot 

be played.

No Preset (DAB only): There is no 

stored preset station.

No Service (DAB only): There is no 

supported DAB broadcast in your 

country or region.

No Step: All of the programmed tracks 

or files have been erased.

Over: You have reached the end of the 

disc while pressing  



 during 

playback or pause.

Push STOP!: You pressed PLAY MODE 



 during playback.

Reading: The system is reading 

information of the disc. Some buttons 

are not available.

Step Full!: You tried to program more 

than 26 tracks or files (steps).

TIME NG!: The Play Timer start and end 

times are set to the same time.

Complete!: The audio file or folder on 

the USB device has been erased.

Device Full!: The USB device is full.

Erase Error!: Erase of audio files or 

folders on the USB device failed.

Error: The USB device could not be 

recognized or an unknown device is 

connected (page 28).

Fatal Error!: The USB device has been 

disconnected while transferring to or 

erasing audio files or folders on the 

USB device.