Sony CMT-HX3R Manual Do Utilizador

Página de 32
CMT-HX3R.GB.3-095-515-11(1)
GB
Messages
CD/MP3 player, Tuner
Complete!: The preset operation ended 
normally.
Invalid: You pressed an invalid button.
LOCKED: The disc tray does not open. 
Contact your nearest Sony dealer.
No Disc: There is no disc in the system, 
or you have loaded a disc that cannot 
be played.
No Step: All of the programmed tracks 
or files have been erased.
Over: You have reached the end of the 
disc while pressing  
 during 
playback or pause.
Push SELECT!: You tried to set the clock 
or timer during timer operation.
Push STOP!: You pressed PLAY MODE 
 during playback.
Reading: The system is reading 
information of the disc. Some buttons 
are not available.
SET CLOCK!: You tried to select the timer 
when the clock is not set.
SET TIMER!: You tried to select the timer 
when the Play Timer is not set.
Step Full!: You tried to program more 
than 26 tracks or files (steps).
TIME NG!: The Play Timer start and end 
times are set to the same time.
USB device
Complete!: The MP3 file or folder on the 
USB device has been erased.
Device Full!: The USB device is full.
Erase Error!: Erase of MP3 files or 
folders on the USB device failed.
Error: The USB device could not be 
recognized or an unknown device is 
connected (page 26).
Fatal Error!: The USB device was 
disconnected while recording to or 
erasing MP3 files or folders on the USB 
device.
Folder Full!: The number of folders 
on the USB device has reached the 
maximum.
Invalid: You have made an invalid or 
currently prohibited operation.
No Device: No USB device is connected 
or the connected USB device has been 
stopped.
No Step: All of the programmed tracks 
or files have been erased.
No Track: No playable file is loaded in 
the system.
Not Supported: An unsupported USB 
device is connected.
Please Wait: The system is readying for 
usage of an USB device.
Protected!: You tried to record or erase 
a write-protected USB device.
Reading: The system is recognizing the 
USB device.
Rec Error!: Recording did not start, 
stopped partway, or otherwise could 
not be performed (page 25).
Removed: The USB device has been 
removed.
Step Full!: You tried to program more 
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is 
connected.
Track Full!: The number of files on the 
USB device has reached the maximum.