Sony CMT-EX100 Manual Do Utilizador

.

>

The indication changes as follows:

* Select “PC/TAPE” to use an optional

component connected to the PC/TAPE jacks as
the sound source.

The start time, the stop time, and the sound
source appear in turn, before the original
display returns. “DAILY” lights up.

?/1

Check the setting

Press CLOCK/TIMER
SELECT on the remote
repeatedly until “DAILY”
appears. The start time,
followed by the stop time, the
sound source appears, then
original display appears.

Cancel the timer

Change the setting

Press CLOCK/TIMER
SELECT on the remote
repeatedly until “TIMER
OFF” appears.

• If the system is on about 30 seconds before the

preset time, the Daily Timer will not be activated.

• Do not operate the system from the time the system

turns on until the play starts (about 30 seconds
before the preset time).

• Once you set the Daily Timer, it functions every

day until you cancel it.

You can connect a digital or an analog
component to this system.

To connect optional components, remove the
small rear cover first.

To the audio output
jacks of an optional
component

PHONES jack

To the digital input jack of
a digital component

Make a digital
recording to a
digital component

Connect a optical cable.

Make an analog
recording to an
analog component

Connect the audio cords.

Listen to the
connected optional
component

Press FUNCTION repeatedly
until “PC/TAPE” appears (or
press PC/TAPE on the remote).

Listen through the
headphones

Connect the headphones to the
PHONES jack.

Start over from step 1.

To the audio input
jacks of an optional
component