Sony CMT-EX100 Manual Do Utilizador

• Set the proper band and frequency (see page 12).

• Connect the antenna properly (see page 7).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you
cannot obtain good reception, we recommend
you connect a commercially available external
antenna.

• Locate the antennas as far away from the speaker

cords as possible.

• Consult your nearest Sony dealer if the supplied

AM antenna has come off the plastic stand.

• Try turning off surrounding electrical

equipments.

• Remove the FM antenna from the rear panel and

place the antenna outside the cabinet. Adjust the
antenna.

• Press FM MODE until “STEREO” appears in the

display.

• See “Severe hum or noise/stations cannot be

received.”, and check the antenna condition.

Unplug the power cord.

Hold down 

?/1

, then plug the power cord

into the wall outlet again.

The system is reset to the factory settings. All
the settings you made such as the preset
stations, clock, and timer are cleared and must
be set again.

One of the following messages may appear or
flash in the display during operation.

There is no CD.

You have reached the end of the CD while
pressing M during play or pause.

You tried to program 25 or more tracks (steps).