Sony cmt-ed1a Manual Do Utilizador

Página de 36
33
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz (50 kHz
step)
Aerial
FM wire aerial
Aerial terminals
75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Aerial
AM bar aerial, External
aerial terminal
Intermediate frequency
450 kHz
Speakers
Speaker system
Full range, active MFB
Speaker units:
10 cm dia., cone type
Rated impedance
4 ohms
Dimensions (w/h/d)
Approx. 195 
×
 205 
×
 120
mm (7  
3
/
4
 
×
 8 
1
/
8
 
×
 4 
3
/
4
in)
Mass
Approx. 1.5 kg (3 lb 7 oz.)
net per speaker
General
Power requirements
230 V AC, 50/60 Hz
Power consumption
60 watts
Dimensions (w/h/d)
Approx. 127 
×
 212 
×
 184
mm (5 
×
 8 
3
/
×
 7 
1
/
in)
incl. projecting parts and
controls
Mass
Approx. 3.6 kg
(7 lb 15 oz)
Supplied accessories
AM bar aerial (1)
Remote RM-SED1 (1)
Stabilizer (1)
Batteries (2)
FM wire aerial (1)
Speaker grille net (1)
Speaker mounting
screws(4)
Optional accesories
Wall hunging blacket
WHB-ED1
Speaker saran net
SSN-ED1
Stand SU-ED1
Design and specifications are subject to change
without notice.
Specifications
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(
λ
 = 780 nm)
Emission
duration: continuous
Laser output
Max. 44.6 
µ
W*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength
780 – 790 nm
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
50 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)
using a Sony TYPE I
cassette
50 – 14,000 Hz (±3 dB),
using a Sony TYPE II
cassette
Wow and flutter
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Amplifier section
DIN power output
15 + 15 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output
17 + 17 watts
(4 ohms at 1 kHz, 10%
THD)
Music power output:
22 + 22 watts
Inputs
MD IN (phono jacks):
sensitivity 450 mV,
impedance 47 kilohms
Outputs
MD OUT (phono jacks):
sensitivity 250 mV,
impedance 1 kilohm
PHONES (stereo phone jack):
accepts headphones of 8
ohms or more
SPEAKER:
active speaker system, 4
ohms