Sony CMT-M373NT Manual Do Utilizador
18
GB
To record using the Group
Function
Function
Press GROUP repeatedly until “GROUP”
appears after step 2. Press GROUP SKIP
repeatedly until “New Group” or the desired
group appears after step 4.
appears after step 2. Press GROUP SKIP
repeatedly until “New Group” or the desired
group appears after step 4.
Tips
• If you want to record manually in the middle of a
track loaded in this system, press CD NX before
step 4 to pause the playback, then press CD NX in
step 5 to start playback.
step 4 to pause the playback, then press CD NX in
step 5 to start playback.
• You can check the remaining recordable time on the
MD during recording by pressing DISPLAY.
• If cyclical static noise is heard while recording an
AM radio program, move the AM loop aerial to
reduce the noise or connect a ground wire to the U
terminal.
reduce the noise or connect a ground wire to the U
terminal.
• For details about LP2/LP4 recording, see “Recording
• You can adjust the recording level (page 21).
When recording from an FM or satellite
broadcast, the first few seconds of material are
often lost due to the time it takes you to ascertain
the contents and press the record button. To
prevent the loss of this material, the Time
Machine Recording feature constantly stores the
most recent audio data in a buffer memory. This
lets you record the sound from 6 seconds before
starting recording, as shown in the illustration
below:
broadcast, the first few seconds of material are
often lost due to the time it takes you to ascertain
the contents and press the record button. To
prevent the loss of this material, the Time
Machine Recording feature constantly stores the
most recent audio data in a buffer memory. This
lets you record the sound from 6 seconds before
starting recording, as shown in the illustration
below:
1
Load a recordable MD.
2
Press FUNCTION repeatedly to select
the desired source to record.
the desired source to record.
3
Press REC MODE on the unit
repeatedly to select the recording
mode.
repeatedly to select the recording
mode.
Select the desired recording time.
4
Press MD
z
.
The MD deck stands by for recording.
Starting recording with
6 seconds of prestored
audio data
6 seconds of prestored
audio data
— Time Machine Recording
Recording time
Select
(Recording mode)
(Recording mode)
Standard
no indication (stereo)
Double
LP2 (LP2 stereo)
Quadruple
LP4 (LP4 stereo)
Double
(change the stereo
signal to monaural)
(change the stereo
signal to monaural)
MONO (monaural)
Start recording
(step6)
(step6)
Beginning of the source to be recorded
Stop Recording
6
seconds
Time
Recorded
portion
portion