Sony CMT-SP55TC Manual Do Utilizador

Press S on the tape deck.

Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.

Stop recording

Press s on the tape deck or CD
player.

Remove the
tape and CD

Press A on the tape deck and CD
player in stop mode.

• When you want to record on the reverse side, press

h on the tape deck in step 5.

• When you record on both sides, be sure to start

from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.

• If you select both sides recording and the tape

reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.

• When you want to reduce the hiss noise in high-

frequency signals recorded at low level, press
DOLBY NR after step 5 so “DOLBY NR” appears
in the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.

You can use any type of tape, TYPE I (normal),
TYPE II (CrO

2

) or TYPE IV (metal), since the

tape deck automatically detects the tape type
(ATS*).

To turn on the system, press ?/1 (power).

?

/

1

 (power)

DOLBY NR

**

* ATS: Automatic Tape Selection
** This tape deck is equipped with the Dolby B-type

noise reduction system.