Sony CMT-DV2D Manual Do Utilizador
38
GB
Use buttons on the unit for the operation.
1
Connect audio cords.
2
Press TV to switch the function to TV.
3
Start playing the connected
component.
component.
1
Connect a digital optical cord.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
operating instructions supplied with the
connected amplifier.
3
Press DVD SETUP in stop mode.
The Setup Display appears.
4
Press
< or , repeatedly to select
“AV”, then press ENTER.
5
Press
M or m repeatedly to select
“Dolby Digital” or “DTS”, then press
ENTER.
ENTER.
6
Press
M or m repeatedly to select “Bit
Stream”, then press ENTER.
7
Press DVD SETUP to turn off the Setup
Display.
Display.
8
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
Digital sound or 5.1 channel DTS
sound.
Note
If “Dolby Digital” or “DTS” is set to “Bit Stream”,
sound is not output from the supplied speakers and
optional headphone does not function.
sound is not output from the supplied speakers and
optional headphone does not function.
Listening to audio from a
connected component
connected component
Enjoying the 5.1 channel
sound with the optional
amplifier
sound with the optional
amplifier