Sony DAR-RH1000 Manual Do Utilizador

r Re

co
rd

Recording from connected
equipment without a timer

You can record from a connected VCR or similar
device. For connection details, see “Connecting a
VCR or similar device” on page 29.

Press HDD or DVD.

If you select DVD, insert a recordable DVD
(see “Inserting a disc” on page 36).

Press INPUT SELECT to select an input
source according to the connection you
made.

The front panel display changes as follows:

Select the line input audio when recording
a bilingual programme on the HDD or DVD-
RWs (VR mode).

Press TOOLS, select “Line Audio Input,” and
press ENTER. Then select “Bilingual,” and
press ENTER.
For details about bilingual recording, see
page 49.

Press REC MODE repeatedly to select a
recording mode.

For details about the recording mode, see
page 48.

Press

REC PAUSE to set this recorder to

record pause.

Insert the source tape into the connected
equipment and set to playback pause.

At the same time, press

REC PAUSE on

this recorder and the pause or play button
on the connected equipment.

Recording starts.
To stop recording, press x REC STOP on this
recorder.

Hint

You can adjust the settings for the recording picture
before recording. See “Adjusting the recording picture
quality and size” on page 54.

Notes

• When recording a video game image, the screen may

not be clear.

• Any programme that contains a Copy-Never copy

guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be recorded.

TV programme
position