Sony CCD-TRV238E Manual Do Utilizador

Página de 116
Getting started
Get
ting st
art
e
d
13
6
Slide the POWER switch up to (CHG) 
OFF.
The CHG (charge) lamp lights up and 
charging starts.
After charging the battery
The CHG (charge) lamp turns off when the 
battery is fully charged. Disconnect the AC 
Adaptor from the DC IN jack. 
To remove the battery pack
1
Lift up the viewfinder.
2
Set the POWER switch to (CHG) OFF.
3
Slide the battery pack out in the direction 
of the arrow while pressing the BATT 
(battery) release button down.
b
Note
• If you do not use the battery pack for a long time, use 
up the battery pack completely before storing it. See 
page 96 a
bout storage of the battery pack.
To check the remaining battery – Battery 
Info
You can check the battery’s current charge level 
and its current remaining recording time both 
during charging or when the power is turned off.
1
Set the POWER switch to (CHG) OFF.
2
Press OPEN and open the LCD panel.
3
Press DISPLAY/BATT INFO.
The battery information appears for about 7 
seconds. 
Keep the button pressed to view it for about 
20 seconds.
Battery charge level: Displays 
approximate remaining amount of 
power left in the battery pack.
Approximate possible recording time 
using the LCD panel.
Approximate possible recording time 
using the viewfinder.
Charging time
Approximate number of minutes required when 
you fully charge a fully discharged battery pack 
BATT (battery) 
release button
POWER switch
POWER switch
OPEN
DISPLAY/BATT INFO
BATTERY  INFO
BATTERY     CHARGE     LEVEL
  
REC  TIME  AVAILABLE
0%
50%
100%
LCD  SCREEN: 
81  min
VIEWFINDER:  112 min
,continued