Sony DCR-SR62E Manual Do Utilizador
8
To charge the battery pack using only
the AC Adaptor
the AC Adaptor
Turn the POWER switch to OFF (CHG), then
connect the AC Adaptor directly to the DC
IN jack on the camcorder.
connect the AC Adaptor directly to the DC
IN jack on the camcorder.
Charging time:
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Approximate time (min.) required when you
fully charge a completely exhausted battery
pack.
Recording/Playback time:
Approximate time (min.) available when you
use a fully charged battery pack.
Approximate time (min.) available when you
use a fully charged battery pack.
NP-FH40:
(Unit:min.)
NP-FH60:
(Unit:min.)
*
1
When [REC MODE] is set to [SP].
*
2
When the LCD backlight turns on.
*
3
When the LCD backlight turns off.
*
4
Typical recording time shows the time when you
repeat recording start/stop, turning the power on/
off and zooming.
repeat recording start/stop, turning the power on/
off and zooming.
On the battery pack
• Before changing the battery pack, turn the
• Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
(Still) lamp (p.9).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the DC
IN jack of your camcorder or the Handycam
Station, even when the mains lead is disconnected
from the wall socket.
IN jack of your camcorder or the Handycam
Station, even when the mains lead is disconnected
from the wall socket.
On the charging/recording/playback time
• Times measured when using the camcorder at
• Times measured when using the camcorder at
25°C (77°F) (10°C to 30°C (50°F to 86°F) is
recommended).
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
which you use your camcorder.
On the AC Adaptor
• Use the nearby wall socket when using the AC
• Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
wall socket immediately if any malfunction
occurs while using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
the wall socket via the AC Adaptor.
Available running time for the
supplied battery pack
supplied battery pack
DCR-SR32E/
SR42E
SR42E
DCR-SR52E/
SR62E/
SR72E/SR82E
SR62E/
SR72E/SR82E
Charging time
125
125
Recording time
*
1
Continuous
recording time
recording time
105
90*
2
100*
3
Typical
recording time
recording time
*
4
50
45*
2
50*
3
Playback time
120
110*
2
DC IN jack
Open the jack
cover
cover
DC plug
POWER
switch
switch
DCR-SR190E/
SR200E
SR200E
DCR-SR290E/
SR300E
SR300E
Charging time
135
135
Recording time
*
1
Continuous
recording time
recording time
115*
2
125*
3
100*
2
105*
3
Typical
recording time
recording time
*
4
55*
2
60*
3
50*
2
50*
3
Playback time
*
2
165
160