Sony DVP-K56P Manual Do Utilizador
F:\SONY DVD\2665121E31K56PRU3\SOURCE\2665121E31\01GB05GET-CEK.fm
master page=left
16
DVP-K56P
2-665-121-E3(1)
B
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select “LINE OUT/S VIDEO OUT” (default) by pressing the
PROGRESSIVE button on the front panel.
With this connection, select “LINE OUT/S VIDEO OUT” (default) by pressing the
PROGRESSIVE button on the front panel.
C
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
B
/C
B
, P
R
/C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel for more than three seconds to output progressive
signals. For details, see “Selecting the video output jack and signal format (PROGRESSIVE
button)” (page 17).
Note that when using the COMPONENT VIDEO OUT jacks will cause the picture to go blank.
In this case, press the PROGRESSIVE button for more than three seconds. Repeat this step until
you see the picture.
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel for more than three seconds to output progressive
signals. For details, see “Selecting the video output jack and signal format (PROGRESSIVE
button)” (page 17).
Note that when using the COMPONENT VIDEO OUT jacks will cause the picture to go blank.
In this case, press the PROGRESSIVE button for more than three seconds. Repeat this step until
you see the picture.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal
or the Setup Display etc. in the NTSC colour system and the picture may not appear on the
PAL colour system televisions. In this case, open the tray and remove the disc.
or the Setup Display etc. in the NTSC colour system and the picture may not appear on the
PAL colour system televisions. In this case, open the tray and remove the disc.
Yellow
White (L)
Red (R)
Yellow
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
directly
01GB01COV.book Page 16 Wednesday, July 12, 2006 4:36 PM