Sony 3-283-149-22(2) Manual Do Utilizador

◆ YC

Selects the type of HDMI signal output from 
HDMI OUT jack.
You cannot select this when “PhotoTV HD” 
mode is activated (page 50).

• If the playback picture becomes distorted, set this 

setting to “RGB.” 

• If the HDMI OUT jack is connected to equipment 

with a DVI jack, “RGB” signals will be 
automatically output even when you select 
“YC

B

C

R

”.

◆ AUDIO (HDMI)

Selects the type of audio signal output from 
the HDMI OUT jack.

A loud noise (or no sound) will be output if you 
connect the player to a TV that is not compatible 
with DOLBY DIGITAL/DTS signals and “AUTO” 
is selected. In this case, select “PCM.”

◆ CONTROL FOR HDMI

Switches the CONTROL FOR HDMI setting
on or off.

When you change this function from “OFF” to 
“ON” on a Sony TV that is compatible with the 
CONTROL FOR HDMI function, all compatible  
devices will change to “ON” automatically, or vice 
versa. For more details, refer to the operation 
instructions supplied with the TV.

◆ LANGUAGE FOLLOW

Switches the languages of the DVD player
to the same as the current TV OSD 
language.
You cannot select this when “CONTROL 
FOR HDMI ” is set to “OFF.”

• Turn off any display before using this function.
• The OSD language for player keeps if the TV’s 

language cannot be supported.

YC

B

C

R

Outputs YC

B

C

R

 signals.

RGB

Outputs RGB signals.

AUTO

Normally, select this. Outputs 
audio signals according to the 
“DIGITAL OUT” settings 
(page 58).

PCM

Converts Dolby Digital, or
96 kHz/24 bit PCM signals to 
48 kHz/16 bit PCM.

OFF

Switches this function off.

ON

Allows you to use the 
CONTROL FOR HDMI 
features (page 17).

ON

Switches this function on.

OFF

Switches this function off.