Sony HTCT260H Manual Do Utilizador

30

GB

The remote control does not 
function.
 Point the remote control at the 

remote control sensor 

 on the 

system.

 Remove any obstacles in the path 

between the remote control and the 
system.

 Replace the battery in the remote 

control with new one, if it is weak.

 Make sure you select the correct 

input on the remote control.

The Control for HDMI function does 
not work properly.
 Check the HDMI connection 

 Set up the Control for HDMI function 

on the TV.

 Check the Control for HDMI settings 

on the connected equipment. Refer 
to the operating instructions 
supplied with the connected 
equipment.

 If you connect/disconnect the AC 

power cord (mains lead), wait for 
more than 15 seconds and operate 
the system.

“PROTECT” appears on the front 
panel display.
 Press  to turn off the system. 

After “STBY” disappears, disconnect 
the AC power cord (mains lead), 
then check that nothing is blocking 
the ventilation holes of the system.

If the system still does not operate 
properly, reset the system as follows:

1

 to turn on the Sound 

2

 while pressing INPUT 

 on the Sound Bar. 

“RESET” appears and the system is 
reset. AMP menu, sound field, etc., 
return to the default settings.