Sony HCD-FX10 Manual Do Utilizador

Página de 100
O
th
e
r O
p
era
tions
67
US
Selecting the connected 
component
You can use a VCR or other components 
connected to the VIDEO 1 or VIDEO 2 jacks on 
the rear panel. Refer to the operation manual 
supplied with the components for further 
information on the operation.
Press FUNCTION repeatedly until “VIDEO 
1” or “VIDEO 2” appears in the front panel 
display.
Each time you press FUNCTION, the mode of 
the system changes in the following sequence.
DVD 
t TUNER FM t TUNER AM t 
VIDEO 1 
t VIDEO 2 t DVD t ...
You can enjoy multiplex broadcast sound when 
the system receive the AC-3 multiplex broadcast 
signal.
• To receive the AC-3 signal, you need to connect a 
digital satellite tuner to the system with an optical 
cable or coaxial cable (page 25) and set the digital 
output mode of the digital satellite tuner to AC-3.
1
Press AMP MENU.
2
Press 
x/X
 repeatedly until 
“DUAL 
MONO”
 appears in the front panel 
display, then press ENTER or 
c
.
3
Press 
x/X
 to select the sound you 
want.
• MAIN: main sound is output from the left 
and right speakers.
• SUB: sub sound is output from the left and 
right speakers.
• MAIN+SUB: main sound and Sub sound 
are output from the left and right speakers.
• MAIN/SUB: main sound is output from 
the left speaker and Sub sound is output 
from the right speaker.
4
Press ENTER or AMP MENU.
The AMP menu turns off.
Enjoying the Sound of 
Other Components
FUNCTION
Enjoying Multiplex 
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER
With cover opened.