Sony 4-114-858-12(1) Manual Do Utilizador

* When the LCD backlight turns on.

On the battery pack
• Before changing the battery pack, slide the 

POWER switch to OFF.

• The Battery Info (p. 53) will not be correctly 

displayed under the following conditions.
– The battery pack is not attached correctly.

– The battery pack is damaged.
– The battery pack is worn-out.

• Sony recommends that you use an NP-F970 

battery pack when you use your camcorder with 
the Memory Recording Unit (optional).

On the charging/recording/playback time
• Times measured with the camcorder at 25 °C 

(77 °F). 10 to 30 °C (50 °F to 86 °F) is 
recommended.

• The recording and playback time will be shorter 

when you use your camcorder in low 
temperatures.

• The recording and playback time will be shorter 

depending on the conditions under which you 
use your camcorder.

You can use the AC Adaptor/Charger to 
obtain AC power.

1

Connect the power cord (mains lead) to 
the AC Adaptor/Charger.

2

Connect the power cord (mains lead) to 
the wall outlet (wall socket).

3

Connect the connecting cable (DK-415) 
to the AC Adaptor/Charger.

4

Set the mode change switch of the AC 
Adaptor/Charger to VCR/CAMERA.

5

Press the connecting part of the 
connecting cable (DK-415) against the 
back of your camcorder in the battery 
slot and slide it down.

On the AC Adaptor/Charger
• Use the nearby wall outlet when using the AC 

Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet (wall socket) 
immediately if any malfunction occurs while 
using your camcorder.

• Do not use the AC Adaptor/Charger placed in a 

narrow space, such as between a wall and 
furniture.

Battery pack

LCD panel 
opened*

LCD panel 
closed

NP-F570

180

190

NP-F770

375

390

NP-F970

570

595

AC Adaptor/
Charger

Power cord

To the wall outlet 
(wall socket)

Mode change 
switch

Connecting cord
DK-415

Charge lamp

Step 3: Charging the battery pack (Continued)