Sony 4-114-858-12(1) Manual Do Utilizador

x

You can select the transition curve.  
Characteristics of the transition curves are 
illustrated in the following graphs.
*1: parameter level
*2: time

Makes the transition linearly.

B

Makes the transition slowly at the end.

Makes the transition slowly at the 
beginning and end, and linearly in 
between.

b

• You cannot change [TRANS TIME] and 

[TRANS CURVE] settings during store, check, 
or execution of [SHOT TRANSITION]. Cancel 
[SHOT TRANSITION] setting by pressing the 
ASSIGN 4 button several times before changing 
[TRANS TIME] or [TRANS CURVE] setting.

x

You can set the timer for starting the shot 
transition. You can select the time from 
[5sec], [10sec] and [20sec]. The default 
setting is [OFF].

x

B

Not use this function

Starts transition to SHOT-A when 
recording is started.

Starts transition to SHOT-B when 
recording is started.

When you set this function to [ON], you 
can record with the wider color range. Your 
camcorder can reproduce brilliant and vivid 
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be 
matched by conventional technologies.
The default setting is [OFF].

b

• The colors may not be well reproduced when 

you play back a movie recorded with this 
function set to [ON] on a TV that does not 
support x.v.Color.

• You cannot set [x.v.Color] in the following 

cases:

– When recording in SD (standard) format
– When recording movies

• When you set [x.v.Color] to [ON], the picture 

profile will be disabled.

x

When you select [ON], you can display 
color bars on the screen or record them on a 
tape. This function helps you to adjust 
colors when you view movies recorded 
with your camcorder on a TV or a monitor. 
The default setting is [OFF].

b

• This function is automatically set to [OFF] 

when you turn the power off and back on.

*1

*2

*1

*2

*1

*2

Press the MENU button 

t select the 

(CAMERA SET) with the SEL/PUSH EXEC dial.