Sony HDW-F500 Manual Do Utilizador
Appendix
A-51
Appendix
Item number
Item
Function
Settable range
Specifies the signal output to the TIME CODE OUT
connector when the internal time code generator is in a
mode for regenerating the playback time code (i.e. during
auto edit mode or when item 607. is set to int-LTC or int-
VITC and item 606. is set to “regene”.)
off tape: The playback time code signal is output to the
connector when the internal time code generator is in a
mode for regenerating the playback time code (i.e. during
auto edit mode or when item 607. is set to int-LTC or int-
VITC and item 606. is set to “regene”.)
off tape: The playback time code signal is output to the
TIME CODE OUT connector without regeneration.
regene: The playback time code signal is output to the
TIME CODE OUT connector after regeneration only
when the VTR is in playback mode.
when the VTR is in playback mode.
through: The playback time code signal is output.
613
TC OUTPUT
SIGNAL IN
REGENE MODE
SIGNAL IN
REGENE MODE
614
PHASE
CORRECTION
CORRECTION
[off]
on
[off]
on
auto
auto
TCG CF FLAG
Specfies whether the color frame (CF) flag is set (ON) or
not set (OFF) in the blank bit of the time code data.
off: Color frame flag is set OFF.
on: Color frame flag is set ON.
auto: Color frame flag is set ON or OFF depending on the
not set (OFF) in the blank bit of the time code data.
off: Color frame flag is set OFF.
on: Color frame flag is set ON.
auto: Color frame flag is set ON or OFF depending on the
phase relationship of the color framing between the
recorded video signal and the time code signal.
recorded video signal and the time code signal.
615
[off tape]
regene
through
through
Specifies whether the phase correction control of the LTC
signal generated by the time code generator is applied or
not.
off: The phase correction control is not applied.
on: The phase correction control is applied.
signal generated by the time code generator is applied or
not.
off: The phase correction control is not applied.
on: The phase correction control is applied.
620
SUPERIMPOSED
CHARACTER
CHARACTER
[off]
on
Specifies whether or not to superimpose time data and
operating status information on the signal output from the
MONITOR connector of HD SDI OUTPUT, the D CONV.
OUT (OPTION) COMPOSITE (SUPER) connector and the
3 (SUPER) connector of D CONV. SDI OUT (OPTION).
off: No information is superimposed.
on: Information is superimposed.
operating status information on the signal output from the
MONITOR connector of HD SDI OUTPUT, the D CONV.
OUT (OPTION) COMPOSITE (SUPER) connector and the
3 (SUPER) connector of D CONV. SDI OUT (OPTION).
off: No information is superimposed.
on: Information is superimposed.
622
CHARACTER H-
POSITION
POSITION
0
...
[8]
...
15
Sets the horizontal position of text information
superimposed on the signal output from the MONITOR
connector of HD SDI OUTPUT, the D CONV. OUT
(OPTION) COMPOSITE (SUPER) connector, the 3
(SUPER) connector of D CONV. SDI OUT (OPTION) and
the PULL DOWN OUT connectors. A setting of 0 displays
the information at the left edge of the screen, and the
position moves to the right as the setting is increased.
There are 16 possible settings, from 0 to 15.
superimposed on the signal output from the MONITOR
connector of HD SDI OUTPUT, the D CONV. OUT
(OPTION) COMPOSITE (SUPER) connector, the 3
(SUPER) connector of D CONV. SDI OUT (OPTION) and
the PULL DOWN OUT connectors. A setting of 0 displays
the information at the left edge of the screen, and the
position moves to the right as the setting is increased.
There are 16 possible settings, from 0 to 15.
623
CHARACTER V-
POSITION
POSITION
0
...
[22]
...
23
Sets the vertical position of text information superimposed
on the signal output from the MONITOR connector of HD
SDI OUTPUT, the D CONV. OUT (OPTION) COMPOSITE
(SUPER) connector, the 3 (SUPER) connector of D CONV.
SDI OUT (OPTION) and the PULL DOWN OUT connectors.
A setting of 0 displays the information at the bottom of the
screen, and the position moves up as the setting is
increased. There are 24 possible settings, from 0 to 23.
on the signal output from the MONITOR connector of HD
SDI OUTPUT, the D CONV. OUT (OPTION) COMPOSITE
(SUPER) connector, the 3 (SUPER) connector of D CONV.
SDI OUT (OPTION) and the PULL DOWN OUT connectors.
A setting of 0 displays the information at the bottom of the
screen, and the position moves up as the setting is
increased. There are 24 possible settings, from 0 to 23.
Note
When this item is set to “auto”, the color frame flag is
determined by the operating mode of the time code
generator.
• When PRESET mode (i.e., item 606 is set to preset and
determined by the operating mode of the time code
generator.
• When PRESET mode (i.e., item 606 is set to preset and
the VTR is in a mode other than automatic edit mode), the
time code signal is generated with color flame-locked to
the video signal, and the color frame flag is ON.
time code signal is generated with color flame-locked to
the video signal, and the color frame flag is ON.
• When REGENE mode (i.e., item 606 is set to regene or
the VTR is in automatic edit mode), color frame flag is
OFF.
OFF.
Note
If two-line display is selected in item 626., sometimes the
second line will disappear in the middle of the screen.
second line will disappear in the middle of the screen.