Sony lbt-zx100d Manual Do Utilizador

Página de 104
Tu
n
e
r
53
GB
Note 
You cannot change the AM tuning interval in Power 
Saving Mode (page 71).
Tips
• The preset stations are retained for half a day even if 
you unplug the power cord or if a power failure 
occurs.
• If you press TUNER/BAND on the unit while the 
system is turned off, the system turns on 
automatically and “TUNER” is selected as the 
function except during Power Saving Mode.
You can listen to a radio station either by 
selecting a preset station, or by manually tuning 
in the station.
Listening to a preset radio 
station
— Preset Tuning
Before tuning to preset stations, be sure to preset 
them first (see “Presetting radio stations” on 
page 51).
1
Press FUNCTION +/– repeatedly to 
select “TUNER FM” or “TUNER AM” 
(or press TUNER/BAND on the unit 
repeatedly to select “FM” or “AM”).
2
Press PRESET +/–
 
repeatedly to select 
the preset station you want.
Listening to a non-preset 
radio station
— Manual Tuning
1
Press FUNCTION +/– repeatedly to 
select “TUNER FM” or “TUNER AM” 
(or press TUNER/BAND on the unit 
repeatedly to select “FM” or “AM”).
2
Press TUNING +/– repeatedly to tune in 
the station you want.
Tips
• For Preset Tuning, you can use the numeric buttons 
to select a preset station. Press the numeric button(s) 
to enter the preset number and then press ENTER.
• To improve broadcast reception, adjust the supplied 
antennas, or connect an external antenna.
• When an FM stereo program has static noise, press 
FM MODE repeatedly until “MONO” lights up in 
the display. There will be no stereo effect, but the 
reception will improve.
• To record the radio programs, see “Recording onto a 
tape manually” (page 55) or “Timer recording radio 
programs” (page 70).
Listening to the radio
Frequency
Preset number