Sony lbt-zx100d Manual Do Utilizador

Listening to a connected TV
or satellite tuner

Use the buttons on the unit for the operation.

Connect the audio cords.

See “Hooking up optional components” on
page 76.

Press TV/SAT.

To switch between the “TV” and
“SAT” function

Hold down TV/SAT and press

?/1

while the

system is turned on. Release

?/1

first, then

release TV/SAT. The system switches the
function from “TV” to “SAT” or vice versa.

Note

If the sound is distorted or too loud when “TV” is
selected, change the function to “SAT”.

Listening to a connected VCR

Connect the audio and video cords.

See “Hooking up optional components” on
page 76.

Press VIDEO on the unit.

Start playing the connected VCR.

Note

The video signal from the connected VCR

is only

output through the VIDEO OUT jack of this unit.

Tip

You can press FUNCTION +/– repeatedly to select
“TV”, “SAT” or “VIDEO”.

Connect the audio cords.

See “Hooking up optional components” on
page 76.

Start recording manually.

See “Recording onto a tape manually” on
page 55.

Recording the audio signal on
a connected component

Connect the audio cords.

See “Hooking up optional components” on
page 76.

Start recording.

Refer to the operating instructions provided
with connected component.

Recording the audio and video
signals from a VIDEO CD onto
a video tape

Connect optional audio cords from the
AUDIO OUT jacks and the supplied
video cord from the VIDEO OUT jack to
the audio and video input jacks of your
VCR.

Start recording.

Refer to the operating instructions provided
with connected component.

Note

The audio signal from the AUDIO OUT jacks may cut
off for a moment during some operations such as when
you press SOUND FIELD, AUDIO or KARAOKE
MODE.

Listening to audio from a
connected component

Recording audio signal
from a connected
component

Recording audio signal on
a connected component