Sony MHC-GNZ888D Manual Do Utilizador

There are three ways to record on a TYPE 
I (normal) tape. Use the buttons on the 
unit for the operation.

You can record an entire VIDEO CD or 
AUDIO CD onto a tape. The recording 
level is adjusted automatically.

You can record just the portion you want 
from a sound source, including connected 
audio components.

You can “mix” sound from any one of the 
sound sources and singing or speaking 
into a microphone (not supplied). The 
mixed sound can be recorded onto a tape.

When recording on the reverse side, 
press TAPE A/B repeatedly until 
“TAPE B” appears in the display. 
Press 

H

 (or nN on the unit) 

repeatedly until the TAPE B reverse 
side indicator lights up to start 
playback of the reverse side. Press x 
at the point you want to start recording. 

Press DVD and load the disc you want 
to record.

Press the function button to select the 
source you want to record. For Sound 
Mixing, if you want to record your 
voice through the microphone only, 
you can do so by selecting the TAPE A 
function and not playing any tape.

Press CD SYNC. “SYNC” lights up in 
the display and “REC” flashes in the 
display.

Press REC PAUSE/START. “REC” 
flashes in the display.

Press DIRECTION repeatedly to 
select “g” to record on one 
side or “j” (or “RELAY”) to 
record on both sides.

When recording on both sides, be sure 
to start from the front side. If you start 
from the reverse side, recording stops 
at the end of the reverse side. When 
recording from the radio, move the 
respective antenna to reduce noise. For 
Manual Recording, when recording 
from a disc, press . or > 
repeatedly (or turn . OPERATION 
DIAL > clockwise or 
counterclockwise) to select tracks.

“REC” lights up in the display. 
Recording starts. You cannot listen to 
other sources while recording. CD 
Synchro Recording stops when the 
current disc finishes playback.