Sony MHC-GNZ888D Manual Do Utilizador

Página de 96
79
GB
Ad
dit
ion
al I
n
fo
rmatio
n
The aspect ratio of the TV screen 
cannot be changed even though you 
can set “TV TYPE” under “SCREEN 
SETUP” in the Setup Menu when you 
play back a wide picture.
• The aspect ratio is fixed on your DVD 
VIDEO.
• If you connect the unit with the S Video 
cord, connect directly to the TV. 
Otherwise, you may not change the 
aspect ratio.
• Depending on the TV, you may not 
change the aspect ratio. 
Messages do not appear on the TV 
screen in the language you want.
• Select the language you want for the on-
screen display in “OSD” under 
“LANGUAGE SETUP” in the Setup 
Menu (page 47).
The language for the sound track 
cannot be changed.
• Multilingual tracks are not recorded on 
the DVD VIDEO being played back.
• The DVD VIDEO prohibits changing 
the language for the sound track.
The subtitles language cannot be 
changed.
• Multilingual subtitles are not recorded 
on the DVD VIDEO being played back.
• The DVD VIDEO prohibits changing 
the subtitles.
The subtitles cannot be turned off.
• The DVD VIDEO prohibits turning off 
subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the 
DVD VIDEO being played back.
• The DVD VIDEO prohibits changing 
the angles.
Tuner
The radio presetting is canceled.
• The power cord is disconnected or a 
power failure occurred for longer than 
half a day. Redo “Listening to a preset 
radio station” (page 53).
There is severe hum or noise. 
(“TUNED” or “STEREO” flashes in the 
display)
• Set the proper band and frequency 
• Connect the antenna properly (page 17).
• Find a place and an orientation that 
provide good reception, then set up the 
antenna again. If you cannot obtain 
good reception, we recommend that you 
connect a commercially available 
external antenna.
• The supplied FM lead antenna receives 
signals along its entire length, so make 
sure you extend it fully.
• Locate the antennas as far away from 
the speaker cords as possible.
• Try turning off the surrounding 
electrical equipment.
A stereo FM program cannot be 
received in stereo.
• Press FM MODE repeatedly until 
“MONO” disappears from the display.
Continued
l