Sony MHC-GNZ77D Manual Do Utilizador

If this function does not work, change the 
transmission time. The transmission time varies 
depending on the TV.

Hold down > and press numeric buttons 
to change the transmission time.

For details, refer to the following table.

The transmission time from the remote is 
selected.

• This function is only available for Sony TV series.

• If distance between the TV and this unit is too far, 

this function may not work. Install the unit near the 
TV.

• Keep the remote pointed in the direction of the TV 

until the TV is turned on and the input source is 
changed correctly.

Progressive scan is the method for displaying 
the TV images which reduces flickering and 
sharpens the image. To use this method, you 
need to connect to a TV that can accept 
progressive signals (page 81).
You can output video signals from 
COMPONENT VIDEO OUT jacks in 
INTERLACE or PROGRESSIVE format.
Use the buttons on the unit for the operation.

The display changes cyclically as follows:
P AUTO 

t

 P VIDEO 

t

 INTERLACE

x P AUTO (PROGRESSIVE AUTO)

Select this when your TV accepts progressive 
signals and the TV is connected to the 
COMPONENT VIDEO OUT jacks. The system 
automatically detects the software type and 
selects the appropriate conversion method.

x P VIDEO (PROGRESSIVE VIDEO)

Select this when your TV accepts progressive 
signals and the TV is connected to the 
COMPONENT VIDEO OUT jacks. 
The system fixes the conversion method to 
PROGRESSIVE VIDEO for video-based 
software.
Select this if the image is not clear when you 
select “P AUTO”.

x INTERLACE

Select this when your TV does not accept 
progressive signals or your TV is connected to 
the VIDEO OUT or S VIDEO OUT jack. 

Hold down > 
and press

1

0.5 (Default)

2

1

3

1.5

4

2

5

2.5

6

3

7

3.5

8

4