Sony MHC-EX66 Manual Do Utilizador
53
EN
3
Press DIRECTION repeatedly to
select the side you want to record
on.
select the side you want to record
on.
Select A to record on one side. Select
Å or a to record on both sides.
4
Press r REC on the tape deck.
The tape deck stands by for recording.
“PLAY · P {REC}” (for front side)
appears.
“PLAY · P {REC}” (for front side)
appears.
5
Start playing the source to be
recorded.
recorded.
6
Turn REC LEVEL to adjust the
recording level.
recording level.
While monitoring the sound at the
highest level, adjust the recording level
so that it falls within the range illustrated
below.
highest level, adjust the recording level
so that it falls within the range illustrated
below.
7
Stop playing the source.
8
Press P or · on the tape deck.
Recording starts.
9
Start playing the source to be
recorded.
recorded.
a
When using a TYPE-I (normal)
or TYPE-II (CrO
or TYPE-II (CrO
2
) tape
When using a TYPE-IV (metal) tape
To
Press
Stop recording
p on the tape deck.
Pause recording
P on the tape deck.
Tips
• Pressing SYSTEM POWER on the DHC-MD77/
EX77MD/EX770MD automatically turns on the
TC-TX77/TX770 deck if you connect them to each
other using the audio bus cable.
TC-TX77/TX770 deck if you connect them to each
other using the audio bus cable.
• If you want to record from the reverse side, press
ª in step 4 so that “ª PLAY P {REC}” (for
reverse side) appears.
reverse side) appears.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR
repeatedly to select B or C before step 4. You
cannot switch DOLBY NR during recording.
repeatedly to select B or C before step 4. You
cannot switch DOLBY NR during recording.
• If you press RESET, the counter display returns to
“00 00.”