Sony DHC-MD77 Manual Do Utilizador
43
EN
When you record from this system’s CD
(digital recording), the track numbers are
automatically marked. In addition, you can
mark track numbers:
(digital recording), the track numbers are
automatically marked. In addition, you can
mark track numbers:
• At any point while recording.
• Automatically while analog recording.
Marking track numbers at
a specific point while
recording
a specific point while
recording
You can mark track numbers at any time
while recording, regardless of the type of
sound source.
while recording, regardless of the type of
sound source.
Press r REC while recording at the
point you want to add a track mark.
point you want to add a track mark.
A track number is marked at that point.
Marking track numbers
automatically while
analog recording
automatically while
analog recording
Track numbers are automatically marked
when the input signal continues to be under a
certain level for more than two seconds and
then returns to the previous level.
when the input signal continues to be under a
certain level for more than two seconds and
then returns to the previous level.
Marking track
numbers
numbers
=
SELECTOR
+
0
)
p
·
∏
§
EJECT
•
•
•
•
•
•
•
•
•
0
10
r
REC
§
OPEN/CLOSE
r REC
1
Press r REC.
The MD deck stands by for recording.
2
Press EDIT/NO repeatedly until
“LevelSync ?” appears.
“LevelSync ?” appears.
3
Press ENTER/YES.
“LevelSyncON?” appears.
4
Press ENTER/YES again.
“LEVEL-SYNC” lights up.
5
Press · ∏ (or P on the remote).
Recording starts.
To cancel the track marking
1 Press EDIT/NO repeatedly until
“LevelSync ?” appears.
2 Press ENTER/YES.
“LevelSyncON?” appears.
3 Press EDIT/NO.
“LEVEL-SYNC” disappears.
In this way, a track number is marked only at
the beginning.
the beginning.
Note
You cannot mark track numbers automatically if the
sound source to be recorded is noisy (e.g., tapes or
radio programs).
sound source to be recorded is noisy (e.g., tapes or
radio programs).
=
SELECTOR
+
0
)
p
·
∏
§
EJECT
•
•
•
•
•
•
•
•
•
0
10
r
REC
§
OPEN/CLOSE
5
3,4
2
1