Sony MHC-GNV99D Manual Do Utilizador
78
GB
You can record from a preset radio station from
a specified time.
To make timer recording, you must first preset
the radio station (see “Presetting radio stations”
on page 59) and set the clock (see “Setting the
clock” on page 14).
a specified time.
To make timer recording, you must first preset
the radio station (see “Presetting radio stations”
on page 59) and set the clock (see “Setting the
clock” on page 14).
1
Tune in the preset radio station (see
“Listening to a preset radio station” on
page 61).
“Listening to a preset radio station” on
page 61).
2
Press TIMER MENU.
3
Press
M or m repeatedly (or turn
. > on the unit clockwise or
counterclockwise) to select “REC
SET?”, then press ENTER.
counterclockwise) to select “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
flashes in the display.
4
Set the time to start recording.
Press
M or m repeatedly (or turn .>
on the unit clockwise or counterclockwise)
to set the hour, then press ENTER.
The minute indication flashes in the
display.
Press
to set the hour, then press ENTER.
The minute indication flashes in the
display.
Press
M or m repeatedly (or turn .>
on the unit clockwise or counterclockwise)
to set the minute, then press ENTER.
“OFF” appears and the hour indicator
flashes in the display.
to set the minute, then press ENTER.
“OFF” appears and the hour indicator
flashes in the display.
5
Set the time to stop recording following
the same procedure as step 4.
the same procedure as step 4.
The type of timer (“REC”), followed by the
start time, the stop time and the preset radio
station to be recorded (e.g., “TUNER FM
5”) appears in the display in sequence
before the original display returns.
start time, the stop time and the preset radio
station to be recorded (e.g., “TUNER FM
5”) appears in the display in sequence
before the original display returns.
6
Load a recordable tape into Deck B.
Make sure the tape is in front side.
7
Press DIRECTION on the unit
repeatedly to select “g” to record on
one side or “j” (or “RELAY”) to
record on both sides.
repeatedly to select “g” to record on
one side or “j” (or “RELAY”) to
record on both sides.
For recording from the reverse side, press
FUNCTION +/– (or TAPE A/B on the unit)
repeatedly to select “TAPE B”. Then, press
H
FUNCTION +/– (or TAPE A/B on the unit)
repeatedly to select “TAPE B”. Then, press
H
(or nN on the unit) repeatedly until
TAPE B reverse side indicator lights up to
start playback of reverse side. Press x at
the point where you want to start recording.
When you record on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of reverse side.
start playback of reverse side. Press x at
the point where you want to start recording.
When you record on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of reverse side.
8
Press ?/1 to turn off the system.
Other operations
Timer recording radio
programs
programs
To
Do this
Check the setting
1
Press TIMER MENU.
“TIMER SELECT?” appears
in the display.
“TIMER SELECT?” appears
in the display.
2
Press ENTER.
3
Press
M or m repeatedly
(or turn .> on the
unit clockwise or
counterclockwise) to select
“REC SELECT?”, then press
ENTER.
unit clockwise or
counterclockwise) to select
“REC SELECT?”, then press
ENTER.
Change the setting
Start from step 1.
Cancel the Timer
Recording
Recording
1
Press TIMER MENU.
“TIMER SELECT?” appears
in the display.
“TIMER SELECT?” appears
in the display.
2
Press ENTER.
3
Press
M or m repeatedly
(or turn .> on the
unit clockwise or
counterclockwise) to select
“TIMER OFF?”, then press
ENTER.
unit clockwise or
counterclockwise) to select
“TIMER OFF?”, then press
ENTER.