Sony MHC-GNV99D Manual Do Utilizador

Página de 108
94
GB
If the system still does not 
operate properly after performing 
the above measures or other 
troubles does not described 
above occur, reset the system as 
follows:
Use buttons on the unit for the operation.
1
Unplug the power cord.
2
Plug the power cord back in.
3
Press ?/1 to turn on the system.
4
Press x, ENTER and ?/1 at the same time.
The system is reset to the factory settings except 
for DVD settings. You should set the settings 
you made, such as the preset stations, clock and 
timer.
To return the DVD setup to the 
default settings
*, perform reset 
as follows:
1
Press 
 DISPLAY when playback is 
stopped.
The Control Menu appears in the on-screen 
display.
2
Press 
M or m repeatedly to select 
 (SETUP), then press ENTER.
3
Press 
M or m repeatedly to select 
“RESET”, then press ENTER.
4
Press 
M or m repeatedly to select 
“YES”, then press ENTER
It takes a few seconds to complete. Do not 
press ?/1 when resetting the system.
* Except for Parental Control settings
Note
If you have connected an optional subwoofer, turn off 
the subwoofer before you reset the system.
(When letters/numbers appear in the 
display)
When the self-diagnosis function is activated to 
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a 
combination of a letter and 4 digits appears in 
the on-screen display and the front panel 
display. In this case, check the following table.
Self-diagnosis Function
First 3 
Characters 
of the service 
number
Cause and corrective action
C 13
This disc is dirty.
• Clean the disc with a soft cloth 
C 31
The disc is not inserted correctly.
• Restart the system, then re-insert 
the disc correctly.
E XX
(XX is a 
number)
To prevent a malfunction, the system 
has performed the self-diagnosis 
function.
• Contact your nearest Sony dealer or 
local authorized Sony service 
facility and give the 5-character 
service number.
Example: E 61 10