Sony MHC-GRX40AV Manual Do Utilizador

Press TAPE A ( or TAPE B ( (or
DECK A ( or DECK B ( on the
remote).

Press TAPE A 9 or TAPE B 9 to play
the reverse side.  (Press DECK A ( or
DECK B ( again on the remote to play
the reverse side.) The tape starts playing.

* The deck stops automatically after repeating the

sequence five times.

**Relay play always follows the following sequence:

Deck A (front side), Deck A (reverse side), Deck B
(front side), Deck B (reverse side).

Stop play

Press p.

Pause

Press PAUSE (or P on the
remote).  Press again to
resume play.

Fast-forward

Press 0 or ).

Rewind

Press 0 or ).

Remove the cassette Press §.

Adjust the volume

Turn VOLUME (or press
VOL +/– on the remote).

• Pressing TAPE A 9( or TAPE B 9( when

the system is off automatically turns the system on
and starts tape playback if there is a tape in the
deck  (One Touch Play).

• You can switch from another source to the tape

deck just by pressing TAPE A 9( or TAPE B

9( (Automatic Source Selection).

During play, turn the jog dial to the same
direction as the 9 or ( indicator to go
forward. “TAPE A (or TAPE B) >>> +1”
appears. Turn to the opposite direction to go
back. “TAPE A (or TAPE B) <<< –1” appears.
(Or press = or + on the remote.)

The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less

than 4 seconds long.

– If completely different information is recorded on

the left and right channels.

– When there are continuous sections of extremely

low level or low frequency sound (like those of a
baritone sax).

– When the unit is placed near a television. (In this

case, we recommend moving the unit farther away
from the television or turning off the television.)