Sony MHC-GNX800 Manual Do Utilizador
30
GB
The timer does not function.
• Check the timer setting and set the correct time
• Cancel the Sleep Timer function (page 22).
• You cannot select the Play Timer and Timer
• You cannot select the Play Timer and Timer
Recording simultaneously.
The remote does not function.
• Remove the obstacle between the remote and the
unit.
• Move the remote closer to the unit.
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Locate the unit away from the fluorescent light.
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Locate the unit away from the fluorescent light.
There is acoustic feedback.
• Decrease the volume.
• Move the microphone away from the speakers or
• Move the microphone away from the speakers or
change the direction of the microphone.
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
persists, place the speakers farther away from the
TV set.
The sound from the component connected to
the VIDEO/MD (AUDIO) IN jacks is distorted.
the VIDEO/MD (AUDIO) IN jacks is distorted.
• If “VIDEO” appears in the display when you press
VIDEO/MD, switch to “MD” function (see “To
switch between the “VIDEO” and “MD”
function” on page 28).
switch between the “VIDEO” and “MD”
function” on page 28).
The sound from the music source have echo
effects.
effects.
• Press FLANGER or DELAY repeatedly until
FLANGER or DELAY indicator lights off.
Sound comes from one channel or
unbalanced left and right volume.
unbalanced left and right volume.
• Place the speakers as symmetrically as possible.
• Check that the speakers are connected securely
• Check that the speakers are connected securely
and correctly.
• The source being played back is monaural.
• Press KARAOKE repeatedly until “m”
• Press KARAOKE repeatedly until “m”
disappears from the display.*
Sound lacks bass.
• Check that the speaker’s + and – terminals are
connected correctly.
* MHC-GNX880/GNX780 only
Disc player
The disc tray does not open and “LOCKED”
appears in the display.
appears in the display.
• Contact your nearest Sony dealer or local
authorized Sony service facility.
The disc tray does not close.
• Load the disc correctly.
• Always close the tray by pressing Z OPEN/
• Always close the tray by pressing Z OPEN/
CLOSE. Trying to push the tray closed with your
fingers may cause problems with the system.
fingers may cause problems with the system.
The disc does not eject.
• You cannot eject the disc during CD Synchro
Recording. Press x to cancel the CD Synchro
Recording, then press Z OPEN/CLOSE to eject
the disc.
Recording, then press Z OPEN/CLOSE to eject
the disc.
• Consult your nearest Sony dealer.
Playback does not start.
• Open the disc tray and check whether a disc is
loaded.
• Load the disc correctly.
• Load the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on
• Load the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on
the disc, then leave the system turned on for a few
hours until the moisture evaporates.
hours until the moisture evaporates.
• Press N to start playback.
Disc access takes a longer time.
• Set CD power manage function to “CD POWER
ON” (page 14).
The sound skips.
vibration (e.g., on top of a stable stand).
• Try moving the speakers away from the unit, or
placing them on separate stands. When you listen
to a track with bass sounds at high volume, the
speaker vibration may cause the sound to skip.
to a track with bass sounds at high volume, the
speaker vibration may cause the sound to skip.
Playback does not start from the first track.
• The system is in Program Play or Shuffle Play
mode. Press PLAY MODE on the remote
repeatedly until “ALL DISCS”, “1 DISC” or
“ALBM” lights up in the display.
repeatedly until “ALL DISCS”, “1 DISC” or
“ALBM” lights up in the display.