Sony mhc-rv2 Manual Do Utilizador

GB

The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated) 50 + 50 watts

(6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference)

60 + 60 watts
(6 ohms at 1 kHz, 10%
THD)

Inputs
GAME INPUT (VIDEO) (phono jack):

1Vp-p, 75 ohms

GAME INPUT (AUDIO) (phono jacks):

voltage 250 mV,
impedance 47 kilohms

MIC (phone jack):

sensitivity 1 mV,
impedance 10 kilohms

Outputs
VIDEO OUT (phono jack):

max. output level
1Vp-p, unbalanced, Sync
negative, load impedance
75 ohms

PHONES (stereo mini jack):

accepts headphones of
8 ohms or more

SPEAKER:

accepts impedance of 6 to
16 ohms

Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.

The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.

Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.

Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.