Sony MHC-GTZ2 Manual Do Utilizador

Tune in the preset station 
(page 34).

Press REC TIMER.
“ON” appears, and the hour indication 
flashes.

Turn OPERATION DIAL to set the 
hour, then press ENTER.
The minute indication flashes. Use the 
procedure above to set the minutes.

Use the same procedure as in step 
3 to set the time to stop recording.
The display shows the timer settings.

Connect a transferable USB device 
to the 

 B port on the unit.

Press  "/1 to turn off the system.

Unit:
Press REC TIMER, turn OPERATION 
DIAL until “REC SELECT” appears, and 
then press ENTER.

RM-AMU053:
Press CLOCK/TIMER SELECT, press 
./>

 repeatedly until “PLAY 

SELECT” or “REC SELECT” appears, 
and then press ENTER.

RM-AMU054:
Press TIMER MENU to select “TIMER 
SELECT”, then press

. Press 

v

/

V

 

repeatedly until “PLAY SELECT” or 
“REC SELECT” appears, and then 
press

.

Repeat the same procedure as above until 
“TIMER OFF” appears, and then press 
ENTER (RM-AMU053 or on the unit) or 

(RM-AMU054).

Start over from step 1.

• The system turns on before the preset time. If 

the system is turned on at the preset time or if 
“STANDBY” flashes in the display, the Play 
Timer and the Recording Timer will not play 
or transfer.

• The Play Timer setting remains as long as the 

setting is not canceled manually.

• The volume is reduced to minimum during the 

Recording Timer.

• The Recording Timer is canceled 

automatically after the Recording Timer has 
been activated.

• The Play Timer may not be activated 

depending on the status of the connected iPod.

• Be sure that the iPod is not playing when 

using the Play Timer.