Sony LBT-ZTX7 Manual Do Utilizador
38
GB
Creating your own
sound effect
sound effect
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band or surround effect.
repeatedly to select a frequency
band or surround effect.
2
Turn OPERATION DIAL to adjust
the level or select the surround
effect you want.
the level or select the surround
effect you want.
3
Repeat steps 1 and 2 to adjust
the level of other frequency
bands and surround effect.
the level of other frequency
bands and surround effect.
4
Press ENTER.
A user equalizer number flashes in the
display.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL to select
a user equalizer number (1~3)
you want to store the equalizer
setting.
Select “EXIT?” to cancel storing.
a user equalizer number (1~3)
you want to store the equalizer
setting.
Select “EXIT?” to cancel storing.
6
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and
replaced by the new setting.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and
replaced by the new setting.
To call up the user equalizer setting
Press PRESET EQ (or EQ on the remote)
repeatedly to select “USER EQ 1”,
“USER EQ 2” or “USER EQ 3”.
repeatedly to select “USER EQ 1”,
“USER EQ 2” or “USER EQ 3”.
To cancel the sound effect
Press PRESET EQ (or EQ on the remote)
repeatedly until “FLAT” appears in the
display.
repeatedly until “FLAT” appears in the
display.
Notes
• When you select certain preset effects, the
surround effect may be canceled.
• When the surround effect is selected,
“SURROUND” lights up in the display.
Frequency level