Sony MHC-MG310AV Manual Do Utilizador
22
Recording a CD by specifying
track order
track order
— Program Edit
When programing, make sure the playing times
for each side do not exceed the length of one
side of the tape.
for each side do not exceed the length of one
side of the tape.
1
Load a recordable tape into deck B.
2
Press CD.
3
Press PLAY MODE repeatedly until
“PGM” appears.
“PGM” appears.
4
Turn DISC ACCESS (or press
T
DISC
or DISC
t
on the remote) to select a
CD.
To program all the tracks on a CD at once,
go to step 6 with “CDAL” displayed.
go to step 6 with “CDAL” displayed.
5
Press –
.
or
>
+ (or
.
or
>
on the remote) repeatedly until the
desired track appears.
desired track appears.
6
Press ENTER.
The track is programed. The programed
track and corresponding step (playing order)
appear, followed by the total playing time.
track and corresponding step (playing order)
appear, followed by the total playing time.
7
Repeat steps 5 and 6 for the same disc
or 4 to 6 for tracks from another disc to
program additional discs or tracks.
or 4 to 6 for tracks from another disc to
program additional discs or tracks.
8
Press CD SYNCHRO.
Deck B stands by to record in the direction
of the indication. The CD player pauses for
play.
of the indication. The CD player pauses for
play.
9
Press DIRECTION repeatedly to select
g
to record on one side. Select
j
(or RELAY) to record on both sides.
10
Press REC PAUSE/START.
Recording starts.
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of
the reverse side.
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of
the reverse side.
Recording to a tape (continued)