Sony MHC-WZ88D Manual Do Utilizador
Di
sc – V
sc – V
a
ri
ous Fun
ctio
ns
55
GB
To return to the default setting
when changing a setting
when changing a setting
Press CLEAR before you press ENTER.
However, note that you cannot return the setting
of “SIZE” to default setting.
However, note that you cannot return the setting
of “SIZE” to default setting.
Note
You cannot perform SPEAKER SETUP when you
connect headphones or microphones to the unit.
connect headphones or microphones to the unit.
x
SIZE
When you connect or disconnect the center
speaker, surround speakers or sub woofer or
you move the surround speakers, change
the setting for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
speaker, surround speakers or sub woofer or
you move the surround speakers, change
the setting for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
Notes
• When you change the setting, the sound cuts off for a
moment.
• Depending on the settings of other speakers, the sub
woofer may output the excessive sound.
x
DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using QUICK
SETUP (page 14), the settings are automatically
displayed. The items that are set to “NONE” in
“SIZE” cannot be selected.
relation to the listening position is shown below.
When you set the distance using QUICK
SETUP (page 14), the settings are automatically
displayed. The items that are set to “NONE” in
“SIZE” cannot be selected.
Be sure to change the value in the Setup menu
when you move the speakers.
when you move the speakers.
1)
When you perform QUICK SETUP (page 14), the
default settings are changed.
default settings are changed.
2)
The setting range changes depending on the front
speaker setting.
speaker setting.
Notes
• When you adjust the speaker distance, the sound may
cut off for a moment.
• If each front and surround speakers are not placed at
an equal distance from your listening position, set the
distance according to the closest speaker.
distance according to the closest speaker.
• Do not place the surround speakers further away from
your listening position than the front speakers.
• Depending on the input stream, the “DISTANCE”
setting may not be effective.
FRONT
YES
CENTER
YES: Normally select this.
NONE: Select this if the center
speaker is not connected.
speaker is not connected.
SURROUND
BEHIND: Select this if the surround
speakers are located in section B.
speakers are located in section B.
SIDE: Select this if the surround
speakers are located in section A.
speakers are located in section A.
NONE: Select this if the surround
speakers are not connected.
speakers are not connected.
SUBWOOFER
YES: Select this if you have
connected an optional sub woofer.
connected an optional sub woofer.
NONE: Select this if an optional sub
woofer is not connected.
woofer is not connected.
90
20
45
A
A
B
B
Position diagram
FRONT
3.0 m
3.0 m
1)
Front speaker distance from the
listening position can be set in 0.2
meter increments from 1.0 to 7.0
meters.
listening position can be set in 0.2
meter increments from 1.0 to 7.0
meters.
CENTER
3.0 m
3.0 m
1)2)
Center speaker distance from the
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
SURROUND
3.0 m
3.0 m
1)2)
Surround speaker distance from the
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
listening position can be set in 0.2
meter increments from 0.0 to 7.0
meters.
3.0 m
3.0 m
continued