Sony mhc-rv6 Manual Do Utilizador
36
GB
Notes
• The video game machine image may appear on the
TV screen even if the system is turned off.
• See “Selecting the sound effect” on page 27 for
video game sound effects.
• If you press GAME while the system is off, the
system turns on, the function switches to GAME,
and the equalizer also switches to the GAME EQ
(previously selected effect).
and the equalizer also switches to the GAME EQ
(previously selected effect).
• If you press GAME while the system is on, the
function switches to GAME and the equalizer
automatically switches to the GAME EQ
(previously selected effect).
automatically switches to the GAME EQ
(previously selected effect).
Listening to audio from a
connected component
connected component
Listening to a connected MD
deck
deck
1
Connect the audio cords.
See “Hooking up optional components” on
page 35.
page 35.
2
Press MD (VIDEO).
Start playing the connected component.
Listening to a connected VCR
1
Connect the audio cords.
See “Hooking up optional components” on
page 35.
page 35.
2
Press MD (VIDEO).
Hold down MD (VIDEO) and press ?/1.
This switches the “MD” function to
“VIDEO”. Once you enable the “VIDEO”
function, just press MD (VIDEO).
This switches the “MD” function to
“VIDEO”. Once you enable the “VIDEO”
function, just press MD (VIDEO).
Notes
• If you cannot select “MD” when you press MD
(VIDEO), press ?/1 while holding down MD
(VIDEO) when the system is on. “VIDEO” will be
switched to “MD”. To return to “VIDEO”, do the
same procedure.
(VIDEO) when the system is on. “VIDEO” will be
switched to “MD”. To return to “VIDEO”, do the
same procedure.
• When you connect a VIDEO CD deck, set to “MD”.
Recording on a connected
component
component
Making an analog recording
on an MD
on an MD
1
Connect an optional audio cable.
See “Hooking up optional components” on
page 35.
page 35.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
with the connected component.
Making an analog recording
from a VIDEO CD to a video
tape
from a VIDEO CD to a video
tape
1
Connect an optional audio cable from
the MD/VIDEO (AUDIO) OUT jacks and
the supplied video cable from the
VIDEO OUT jack to your VCR.
the MD/VIDEO (AUDIO) OUT jacks and
the supplied video cable from the
VIDEO OUT jack to your VCR.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
with the connected component.
Note
You cannot record from a VIDEO CD to an MD
digitally. When you record from a VIDEO CD to an
MD, make an analog recording on MD.
digitally. When you record from a VIDEO CD to an
MD, make an analog recording on MD.
Hooking up optional components
(continued)
(continued)