Sony MHC-RG444S Manual Do Utilizador
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
16
GB
To change the AM tuning interval
(except for European, Russian
and Saudi Arabian models and
Australian model MHC-RG444S)
(except for European, Russian
and Saudi Arabian models and
Australian model MHC-RG444S)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding
TUNING MODE on the unit, press
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding
TUNING MODE on the unit, press
?/1 on the
unit. When you change the interval, all the AM
preset stations are erased. To reset the interval,
repeat the same procedure.
preset stations are erased. To reset the interval,
repeat the same procedure.
Note
You cannot change the AM tuning interval in Power
Saving Mode (page 27).
Saving Mode (page 27).
Tips
• The preset stations are retained for about a day even
if you disconnect the power cord or if a power failure
occurs.
occurs.
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
external antenna.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 15).
(see “Presetting radio stations” on page 15).
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
tuner.
repeatedly) to switch the function to
tuner.
2
Press TUNER BAND repeatedly to
select “FM” or “AM”.
select “FM” or “AM”.
3
Press TUNING MODE repeatedly until
“PRESET” appears in the display.
“PRESET” appears in the display.
4
Press – or + (or TUNING – or + on the
unit) repeatedly to select the desired
preset station.
unit) repeatedly to select the desired
preset station.
Listening to the radio
Frequency
Preset number