Sony mhc-rg66 Manual Do Utilizador

GB

DIN power output (rated) 115 + 115 watts (6 ohms

at 1 kHz, DIN)

Continuous RMS power output (reference)

140 + 140 watts (6 ohms
at 1 kHz, 10% THD)

Music power output (reference)

280 + 280 watts (6 ohms
at 1 kHz, 10% THD)

Front speaker
DIN power output (rated) 50 + 50 watts (6 ohms at

1 kHz, DIN)

Continuous RMS power output (reference)

60 + 60 watts (6 ohms at
1 kHz, 10% THD)

Music power output (reference)

120 + 120 watts (6 ohms
at 1 kHz, 10% THD)

Sub woofer
DIN power output (rated) 100 watts (12 ohms at

40 Hz, DIN)

Continuous RMS power output (reference)

120 watts (12 ohms at
40 Hz, 10% THD)

Music power output (reference)

120 watts (12 ohms at
40 Hz, 10% THD)

The following measured at AC 120, 220, 230 –
240 V, 50/60 Hz
DIN power output (rated) 115 + 115 watts (6 ohms

at 1 kHz, DIN)

Continuous RMS power output (reference)

140 + 140 watts (6 ohms
at 1 kHz, 10% THD)

The following measured at AC 120, 220, 230 –
240 V, 50/60 Hz
DIN power output (rated) 100 + 100 watts (6 ohms

at 1 kHz, DIN)

Continuous RMS power output (reference)

120 + 120 watts (6 ohms
at 1 kHz, 10% THD)

Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.

The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.

Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.

Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.