Sony MKE-9040M Manual Do Utilizador
1-15
MVE-9000 IM
<LED on the CPU-DK module> : COM CPU-1
: COM CPU-2
DI1 (green) (B-5) : CD (Card Detect) status LED
Lit when the CPU-DK module is inserted correctly to the
parent board.
Lit when the CPU-DK module is inserted correctly to the
parent board.
DI2 (green) (F-3) : RUN status LED
Lit when the CPU-DK module starts operating.
Lit when the CPU-DK module starts operating.
DI3 (F-3), DI6 (F-3), DI7 (F-3), DI8 (F-4) (green) :
STATUS1 to STATUS4 LED
Used for maintenance purpose. Only the STATUS1 LED is
lit in normal operation.
STATUS1 to STATUS4 LED
Used for maintenance purpose. Only the STATUS1 LED is
lit in normal operation.
DI4 (green) (B-5) :
+
+
+
+
+3.3 V
Indicates the status of the VCC (CORE) and VCC (I/O)
powers that are supplied to the CPU-DK module.
powers that are supplied to the CPU-DK module.
<Switch on the CPU-DK module> : COM CPU-1
: COM CPU-2
SW1 (D-5) : RESET switch
Pressing this switch resets the CPU-DK module.
n
In some machines in which the CPU-DK module is
installed, the system reset may be activated.
Pressing this switch resets the CPU-DK module.
n
In some machines in which the CPU-DK module is
installed, the system reset may be activated.
SW2 (C-5) : MODE switch
8-pin DIP switch
Used only for production in the assembly factory. All
switches are set to OFF for normal operation.
Default setting when shipped from the factory is all OFF.
8-pin DIP switch
Used only for production in the assembly factory. All
switches are set to OFF for normal operation.
Default setting when shipped from the factory is all OFF.
<LED on the DIF-130 board> : PC card
D1 (A-1) : DETECT A
Lit when the socket “A” is inserted correctly.
D1 (A-1) : DETECT A
Lit when the socket “A” is inserted correctly.
D2 (A-1) : DETECT B
Lit when the socket “B” is inserted correctly.
Lit when the socket “B” is inserted correctly.
D3 (A-1) :
+
+
+
+
+3.3 V
+3.3 V power supply status indication.
Lit when
Lit when
+3.3 V power is supplied.
D4 (A-1) : ACTIVE A
Lit when the socket “A” is active.
Lit when the socket “A” is active.
D6 (A-1) : CD (Card Detect) status LED
Lit when the DIF-130 board is inserted into the mother
board correctly.
Lit when the DIF-130 board is inserted into the mother
board correctly.
D7 (A-1) : GPO status LED
GPO status indication.
GPO status indication.
< Test terminal on the DIF-130 board > : PC card
E1 (E-1), E2 (A-1), E3 (B-2), E4 (C-2) : GND terminal
Use this terminal as the earth point for measuring the
respective check terminals.
E1 (E-1), E2 (A-1), E3 (B-2), E4 (C-2) : GND terminal
Use this terminal as the earth point for measuring the
respective check terminals.
TP1 (B-3) : RST# signal check terminal
RST # signal measuring terminal.
RST # signal measuring terminal.
TP2 (B-3) : CLK signal check terminal
CLK signal measuring terminal.
CLK signal measuring terminal.
TP3 (B-3) : FRAME signal check terminal
FRAME signal measuring terminal.
FRAME signal measuring terminal.
TP4 (B-3) : IRDY signal check terminal
IRDY signal measuring terminal.
IRDY signal measuring terminal.
TP5 (B-3) : TRDY signal check terminal
TRDY signal measuring terminal.
TRDY signal measuring terminal.
TP6 (C-3) : DEVSEL signal check terminal
DEVSEL signal measuring terminal.
DEVSEL signal measuring terminal.
TP7 (C-3) : STOP signal check terminal
STOP signal measuring terminal.
STOP signal measuring terminal.
TP8 (C-3) : LOCK signal check terminal
LOCK signal measuring terminal.
LOCK signal measuring terminal.