Sony pdw-f30 Manual Do Utilizador

92

Using the PDBK-102 MPEG-TS Input/Output Board

  Chapt

er

 7

  Us
ing Op

tio
n

 Boar

ds

• Install the PDBK-101 in option slot 1.
• Make network settings in the network settings menu. 

This menu appears only when the PDBK-101 option 
board is installed.

For safety, do not connect a peripheral device connector 
that might have excessive voltage to the network connector 
of this unit. 
Follow the instructions in this manual when making 
connections.

With the PDBK-102 MPEG-TS Input/Output Board 
installed in option slot 2 of this unit, you can make i.LINK 
connections between this unit and video devices 
complying with the HDV 1080i

 1)

 standard (called “HDV 

devices” below), and between this unit and computers to 
which HDV devices may be connected. These connections 
can be used for input and output of MPEG-2 TS streams.
This allows you to input material shot by HDV camcorders 
or the results of editing on a computer, and to record the 
input on XDCAM discs. You can also output video and 
audio from this unit to HDV devices.

1) HDV and 

 are trademarks of Sony Corporation and Victor 

Company of Japan, Limited.

The following example shows a connection between this 
unit and an HDV camcorder.

Install the PDBK-102 in option slot 2.

Laptop computer

Network cable (not supplied)

To network 
connector

To 

network connector (GbE)

PDW-F30

Set the remote control switch to “NETWORK”.

HDV camcorder

S400 connector (6-pin)

PDW-F30

i.LINK connector (4-pin)

i.LINK cable (not supplied)