Sony pfm-42x1s Manual Do Utilizador

Página de 376
51
 (GB)
Specifications
Specifications
Video processing
Preset signal
See page 28 (GB).
Sampling rate
13.5 MHz to 140 MHz
Panel system
AC-type Plasma Display Panel
Display resolution 1024 dots (horizontal) 
× 768 lines
(vertical)
Pixel pitch
0.90 (horizontal) 
× 0.676 (vertical)
mm (
1
16
 
× 
1
32
 inches)
Picture size
920.1 (horizontal) 
× 518.4 (vertical)
mm (36 
7
32
 
× 20 
13
32
 inches)
Panel size
42-inch (diagonal 1058 mm)
Inputs and Outputs
INPUT1
RGB/YUV
D-sub 15-pin (female) (
×1) (See
“Pin assignment” on page 52
(GB).)
AUDIO
Stereo minijack (
×1)
500 mVrms, high impedance
INPUT2 
1)
DVI
DVI-HDCP (DVI Specification
Rev. 1.0 compliant)
AUDIO
Stereo minijack (
×1)
500 mVrms, high impedance
CONTROL S IN/OUT
AUDIO OUT
Stereo minijack (
×1)
REMOTE (RS-232C)
D-sub 9-pin (
×1)
VIDEO (NTSC, PAL, SECAM, NTSC4.43,
PAL60, PAL-M, PAL-N)
 2)
COMPOSITE IN
BNC (
×1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75 ohms
(automatic termination)
COMPOSITE OUT
BNC (
×1) Loop-through
Y/C IN
Mini DIN 4-pin (
×1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75 ohms terminated
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75 ohms terminated
Burst 0.3 Vp-p ±2 dB (PAL),
75 ohms terminated
 AUDIO IN
Pinjack (
×2)
500 mVrms, high impedance
SPEAKER
7 W + 7 W (6 ohms), direct
unbalanced impedance:
6-16 ohms
Component/RGB Input Adaptor BKM-V11
(Not supplied)
YUV/RGB IN
YUV/RGB
BNC (
×5)
AUDIO
Pinjack (
×2)
500 mVrms, high impedance
RGB/Component Active Through Adaptor
BKM-V12 (Not supplied)
RGB/YUV ACTIVE THROUGH
RGB/YUV IN
D-sub 15-pin (female) (
×1)
AUDIO IN
Stereo minijack (
×1)
500 mVrms, high impedance
RGB/YUV OUT D-sub 15-pin (female) (
×1)
General
Power requirements
100 V to 240 V AC, 50/60 Hz,
4.2 A to 1.8 A
Power consumption
400 W
Operating conditions
Temperature: 0 °C to 35 °C
(32 °F to 95 °F)
Humidity: 20
% to 90%
(no condensation)
Atmospheric pressure: 800 to
1100 hPa
.........................................................................................................................................................................................................
1) The PFM-42X1N is not equipped with the INPUT2 connectors.
2) The PFM-42X1N is not equipped with VIDEO connectors. For the PFM-42X1N, composite video and Y/C input can
be input to the display when the video input adaptor BKM-V10 (not supplied) is installed in the display.