Sony PSJ20 Manual Do Utilizador
4
220–240V
110–120V
1
Assembling the Turntable
1
Place the rubber mat on the platter.
To make sure it operates properly, rotate the platter
clockwise once or twice with your hand.
clockwise once or twice with your hand.
Notes on installation
• Place the turntable on a level surface.
• Avoid placing the unit near electrical appliances (such as a
• Avoid placing the unit near electrical appliances (such as a
television, hair dryer, or fluorescent lamp) which may
cause hum or noise.
cause hum or noise.
• Place the turntable where it will not be subject to any
vibration, such as from speakers, slamming of doors, etc.
• Keep the unit away from direct sunlight, extremes of
temperature, and excessive dust and moisture.
Getting Started
Setting the Voltage Selector
(Only on models supplied with
a voltage selector)
(Only on models supplied with
a voltage selector)
Check that the voltage selector is set to the local power
line voltage. If not, set the selector to the correct
position using a screwdriver.
line voltage. If not, set the selector to the correct
position using a screwdriver.
1
Remove the dust cover.
2
Remove the lid, and set the voltage selector to the
local power line voltage using a screwdriver.
local power line voltage using a screwdriver.
3
Replace the lid and close the dust cover.