Sony RM-AV2500T Manual Do Utilizador

Press the “ENTER” key.

When the data has been transferred,
“TV” and “

R” go off. If the data have

been successfully transferred, the
backlight of the display turns off.

If “NG” appears while sending the data, go
back to Step 6 and continue the operation
or press COMMANDER OFF to stop the
operation.

• The data of the “learned” signal and the

System Control function programmed for a
Component Select button cannot be
transferred.
You can use the learning function (page 32) to
programme the “learned” signal and the
System Control functions programmed for a
Component Select button on another remote
commander.

• Be sure that the receiving remote commander

is ready to receive data.

The data of a Component Select button
on this Commander (the settings and
learned signals programmed on the keys
and buttons) can be transferred to a
Component Select button on another
Sony RM-AV2500T.

Perform Steps 1 to 3 on page
38.

Press the 2 key.

Press the Component Select
button whose data you want to
send.

Confirm that the receiving remote
commander is ready to accept
data.

(To set the receiving commander,
follow the procedure on page 40.)