Sony rdr-dc205 Manual Do Utilizador
28
To watch or record PAY-TV/Canal Plus
analogue programmes, set your recorder to
receive the programme positions using the
on-screen display.
In order to set the programme positions
correctly, be sure to follow all of the steps
below.
analogue programmes, set your recorder to
receive the programme positions using the
on-screen display.
In order to set the programme positions
correctly, be sure to follow all of the steps
below.
1
Press SYSTEM MENU.
The System Menu appears.
2
Select “Initial Setup” using M/m,
and press
and press
.
3
Select “Video In/Out” using M/m,
and press
and press
.
4
Select “LINE 3 Out [LINE 1 In]” using
M/m, and press .
M/m, and press .
5
Press M/m to select “Video
[Decoder]” or “RGB [Decoder],” and
press .
[Decoder]” or “RGB [Decoder],” and
press .
6
Press O RETURN to return to
“Initial Setup.”
“Initial Setup.”
7
Select “Channel” using M/m, and
press .
press .
8
Select “Analog Manual Setting”
using M/m, and press .
using M/m, and press .
9
Select the desired programme
position using M/m, and press the
red button (“Edit”).
position using M/m, and press the
red button (“Edit”).
10
Select “Channel” using M/m, and
select the external decoder
programme position using </,.
select the external decoder
programme position using </,.
11
Select “Sound System” using M/m,
and select an available TV system, B/
G, D/K, I, or L using </,.
and select an available TV system, B/
G, D/K, I, or L using </,.
To receive broadcasts in France, select
“L.”
“L.”
12
Select “Decoder” using M/m, and
select “On” using </,.
select “On” using </,.
13
Press the red button (“Save”).
To return to the previous step
Press O RETURN.
b
• If you disconnect the recorder’s mains lead, you
will not be able to view the signals from the
connected decoder.
connected decoder.
• To watch the connected external decoder (PAY-
TV/Canal Plus analogue decoder) programmes
while the recorder is in standby mode, set
“Standby Mode” to “Mode 2” in the “System 1”
setup (page 87).
while the recorder is in standby mode, set
“Standby Mode” to “Mode 2” in the “System 1”
setup (page 87).
Setting external decoder (PAY-
TV/Canal Plus analogue
decoder) programme positions
TV/Canal Plus analogue
decoder) programme positions