Sony SLV-SX717E Manual Do Utilizador
46
Recording TV programmes
Master Page : Left
filename[010bas.fm] model name1[SLV-SE610A/E] model name2[SLV-SE710D/E]
model name3[SLV-SX710D/E] model name4[SLV-SX717D/E]
model name5[SLV-SE810D/E] model name6[SLV-SX810D]
[3-065-674-E1(1)]
time counter and the remaining time appear alternately. The
indicator
indicates the remaining time.
In order to get an accurate remaining time indication, be sure TAPE
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
(see page 82).
LENGTH in the OPTIONS-1 menu is set according to the tape type you use
(see page 82).
To watch another TV programme while recording
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the
programme number buttons on the remote
commander. For two-digit numbers, press the
- (ten’s digit) button followed by the programme number buttons.
commander. For two-digit numbers, press the
- (ten’s digit) button followed by the programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The
DISPLAY information appears on the TV screen indicating information
about the tape, but the information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV. When
using a decoder, make sure to leave it on.
Notes
• The
DISPLAY information does not appear during still (pause) mode or slow-
motion playback.
• The
DISPLAY information will not appear while playing an NTSC-recorded
tape.
1
Press t TV/VIDEO to turn off the VIDEO indicator in the display
window.
window.
2
Select another programme position on the TV.
6
1 : 4
SP
2
0 : 0 0 : 2
Remaining time
Time counter
Safety tab