Sony ss-cnp700 Manual Do Utilizador
49
US
F:\Sony SEM
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\050AMP_HT-
DDW700_UCA.fm
HA\Revision2_DDW700\J906XXXX_26614591212DDW700_US\2661459122\050AMP_HT-
DDW700_UCA.fm
masterpage: Right
HT-DDW700
2-661-459-12 (2)
Using the
Remote
Changing button
assignments
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the DVD jacks on the receiver, you
can set the DVD button on this remote to
control the DVD recorder.
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the DVD jacks on the receiver, you
can set the DVD button on this remote to
control the DVD recorder.
1
Hold down the input button of
which you want to change the
assignment.
which you want to change the
assignment.
Example: Press DVD.
2
Referring to the table below,
press the corresponding button
for the category you want.
press the corresponding button
for the category you want.
Example: Press 4.
Now you can use the DVD button to
control the DVD recorder.
Now you can use the DVD button to
control the DVD recorder.
Categories and the
corresponding buttons
corresponding buttons
a)
Sony VCRs are operated with a VTR 2 or VTR 3
setting which correspond to 8 mm and VHS
respectively.
setting which correspond to 8 mm and VHS
respectively.
b)
Sony DVD recorders are operated with a DVD 1 or
DVD 3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
DVD 3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
To clear all remote button
assignments
assignments
Press ?/1, AUTO CAL and MASTER VOL –
at the same time.
The remote is reset to its factory settings.
at the same time.
The remote is reset to its factory settings.
Using the Remote
Categories
Press
VCR (command mode VTR 3)
a)
1
VCR (command mode VTR 2)
a)
2
DVD player/DVD recorder
(command mode DVD1)
(command mode DVD1)
b)
3
DVD recorder
(command mode DVD3)
(command mode DVD3)
b)
4
CD player
5
MD deck
6
Tape deck B
7
Tuner (this receiver)
8
DVR (Digital CATV terminal)
9
DSS (Digital Satellite Receiver)
0/10
010COV_HT-DDW700_UCA.book Page 49 Friday, January 13, 2006 3:36 PM