Sony STR-DG700 Manual Do Utilizador
81
GB
C:\Documents and
Settings\pc13\Desktop\JC060016_2680065111DG700_GB\2680065111\GB06ENJ_STR-DG700-
CEL.fm
Settings\pc13\Desktop\JC060016_2680065111DG700_GB\2680065111\GB06ENJ_STR-DG700-
CEL.fm
masterpage: Right
STR-DG500
2-662-258-12 (1)
Ad
dition
dition
al I
n
n
fo
rm
atio
n
Specifications
Amplifier section
Models of area code CEL, CEK, AU
Stereo Power Output
Stereo Power Output
1)
, Reference Power
Output
1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
85 W + 85 W, 110 W/ch
8 ohms 1 kHz, THD 0.7%
100 W + 100 W, 120 W/ch
8 ohms 1 kHz, THD 10%
125 W + 125 W, 150 W/ch
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there may be no sound
output.
and surround back. Depending on the sound field
settings and the source, there may be no sound
output.
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and
field and
equalizer
bypassed)
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N
3)
: 96 dB
(A, 500 mV
4)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (
Optical
)
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER, SURROUND
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±6 dB, 1 dB step
3)
INPUT SHORT (with sound field and equalizer
bypassed).
bypassed).
4)
Weighted network, input level.
FM tuner section
Tuning range
87.5 - 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo
76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo
0.3%/0.5%
Separation
45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
AM tuner section
Tuning range
Intermediate frequency
450 kHz
Usable sensitivity
50 dB µ/m (at 1,000 kHz or
999 kHz)
999 kHz)
Video section
Inputs/Outputs
Video:
1 Vp-p/75 ohms
S-video:
Y: 1 Vp-p/75 ohms
C: 0.286 Vp-p/75 ohms
C: 0.286 Vp-p/75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p/75 ohms
P
P
B
/C
B
/B-Y: 0.7 Vp-p/
75 ohms
P
P
R
/C
R
/R-Y: 0.7 Vp-p/
75 ohms
80 MHz HD Pass Through
80 MHz HD Pass Through
Area code
Power requirements
CEL, CEK
230 V AC, 50 Hz
AU
240 V AC, 50 Hz
Area code
Tuning scale
10 kHz step
9 kHz step
CEL, CEK, AU
–
531 –
1,602 kHz
continued
GB01COV_STR-DG700-CEL.book Page 81 Wednesday, February 15, 2006 4:11 PM