Sony TA-E9000ES Manual Do Utilizador

20

A

B

B

C

C

A

p Center speaker distance

CENTER XX.X meter

Initial setting : 5.0 meter
Set the distance from your listening position to the center
speaker.
• Center speaker distance can be set in 0.1 meter (1 foot)

steps from 1.0 to 12.0 meters (3 to 40 feet).

p Rear speaker distance

REAR XX.X meter

Initial setting : 3.5 meter
Set the distance from your listening position to the rear
(left or right) speaker.
• Rear speaker distance can be set in 0.1 meter (1 foot)

steps from 1.0 to 12.0 meters (3 to 40 feet).

• If both speakers are not placed an equal distance from

your listening position, set the distance to the closest
speaker.

z

Please note that, setting the speaker distance closer than the
actual location of the speakers will cause a delay in the output of
the sound from that speaker. In other words, the speaker will
sound like it is farther away.
For example, setting the center speaker distance 1~2 m (3~6 feet)
closer than the actual speaker position will create a fairly realistic
sensation of being “inside” the screen. If you cannot obtain a
satisfactory surround effect because the rear speakers are too
close, setting the rear speaker distance closer (shorter) than the
actual distance will create a larger soundstage.
Adjusting these parameter while listening to the sound often
results in much better surround sound. Give it a try!

p Sub woofer distance

S.W XX.X meter

Initial setting : 5.0 meter
Set the distance from your listening position to the sub
woofer.
• Sub woofer distance can be set in 0.1 meter (1 foot) steps

from 1.0 to 12.0 meters (3 to 40 feet).

p Sub woofer phase polarity

S.W PHASE [NORMAL]

Initial setting : NORMAL
Set the sub woofer phase polarity.
There is usually no problem when the sub woofer phase
polarity is set to "NORMAL". However, depending on the
type of front speakers, the position of the sub woofer, and
the cut-off frequency of the sub woofer, setting the phase
polarity to "REVERSE" may produce better bass.
Besides bass reproduction, the richness and tightness of
the overall sound may also be affected. While listening
from the main listening position, select the setting that
best suits your environment.

p Rear speaker position*

REAR POSI. [BEHIND]

Initial setting : BEHIND
This parameter lets you specify the location of your rear
speakers for proper implementation of the Digital Cinema
Sound “VIRTUAL” sound fields. Refer to the illustration
below.
• Select “SIDE” if the location of your rear speakers

corresponds to section A.

• Select “MIDDLE” if the location of your rear speakers

corresponds to section B.

• Select “BEHIND” if the location of your rear speakers

corresponds to section C.

This setting only effects the “VIRTUAL” sound fields.

* This parameter is not available when “Rear speaker

size“ is set to “NO”.