Sony TA-E9000ES Manual Do Utilizador

4

This chapter describes how to connect
various audio and video components
to the control amplifier.  Be sure to
read the sections for the components
you have before you actually connect
them to the control amplifier.

Check that you received the following items with the unit:
• Audio Cord (3)
• Remote commander RM-TP501E (remote) (1)
• LR6 (size-AA) alkaline batteries (4)
• Coin shaped lithium battery (CR-2032) (1)

Insert four size-AA (LR6) alkaline batteries and one coin
shaped lithium battery with the + and – properly oriented
in the battery compartment.  When using the remote,
point it at the remote sensor g on the control amplifier.
For details, refer to the operating instructions supplied
with your remote.

• Do not leave the remote in an extremely hot or humid place.
• Do not use new batteries with old ones.
• Do not mix battery types.  This remote is designed for use with

alkaline batteries only.

• Do not expose the remote sensor to direct sunlight or lighting

apparatuses.  Doing so may cause a malfunction.

• If you don’t use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery
leakage and corrosion.

• Turn off the power to all components before making

any connections.

• Do not connect the AC power cords until all of the

connections are completed.

• Be sure to make connections firmly to avoid hum and

noise.

• When connecting an audio/video cord, be sure to

match the color-coded pins to the appropriate jacks on
the components:  yellow (video) to yellow;  white (left,
audio) to white;  and red (right, audio) to red.