Sony kv-32fsi 7 Manual Do Utilizador

 

 

 

 

   

 

 

 

 

   

Make sure Cable is set to ON in the Channel Setup

menu (page 26).

Perform Auto Program to add channels that are not

presently in the memory (page 17).

 

   

       

 

 

 

 

   

 

 

Batteries could be weak. Replace them (page 2).

Cl

Move the TV 3-4 feet away from fluorescent lights.

 Make sure you’have not 

 switched your

TV from the channel 3 or 4 setting if you are using

another device to change channels.

If you are using another device to control channels, be
sure the FUNCTION button for that device has been
pressed. For example, if you’re using your VCR to

control channels, be sure to press the VCR/DVD
FUNCTION buttons (page 15).

 

           

Clean the TV with a soft dry cloth. Never use strong

solvents such as thinner or 

 which might

damage the finish of the cabinet.
In the password screen; enter the following master

password: 4357. After using the master password, you

must create a new password; it cannot be used to

unlock currently blocked channels.

. 

 

   If you use the

 button to close the Basic menu, only.

the Basic menu appears when you press 

 again. To

have access to the other menus, use the 

 button to

select Advanced Menu (page 36).

 

 

 

 

Press the TV FUNCTION button. You may have

   

 

inadvertently pressed the 

 

button, which changes the PIP buttons to VCR mode

 

Be sure your 

 picture is set to a video source/

channel that has a program airing.

You may be tuned to a video input with nothing

connected to it. Try cycling through your video inputs

using the yellow PIP TV/VIDEO button with the red
dot (page 18).
PIP is not set to receive a signal from the AUX input. 
you have connected a VCR, DVD or Satellite Receiver

to the AUX input on the TV, it will not show in the

small window picture.

 

. .   

.