Nokia 7250, 7250i Manual Do Serviço
CCS Technical Documentation
Disassembly Instructions
Company confidential
NHL-4J/
Issue 2 06/03
Nokia Corporation.
Page 5
The Power Key has to be unlocked on the lower side first.
Unlock Antenna on both sides with SRT-6.
Antenna Pogo Pins can be removed by pushing with Torx
driver through the C-Cover.
driver through the C-Cover.
If there is a need to change the Release Button, also SRT-6
can be used.
can be used.
Remove Connector Shield when cleaning contacts or
changing Camera Module.
changing Camera Module.
Camera Module is attached with four snaps into its
guidance. Place SRT-10 as shown in the picture and unlock
the snaps on both sides. Note releasing order.
guidance. Place SRT-10 as shown in the picture and unlock
the snaps on both sides. Note releasing order.
Remove Camera Module carefully. Take care that Camera
marking shows to right side when assembling.
marking shows to right side when assembling.
Do not touch contacts and camera lens. Use always
SRT-10 for assembly and disassembly.
SRT-10 for assembly and disassembly.